Problem with ONVIF Authentication on R26P

[Akuvox_Jon]

Hi Carsten,

This firmware passed the profile S certificatoin.

And I also tested it with onvifer you mentioned.

I am not sure whether the issue is due to the PVR System you mentioned.

What is the PVR System please? May I know details about it please?

Best Regards.

[Carsten]

Hi Jon,

i'm using the Surveillance Station on my Sonylogy NAS. Maybe you can contact your colleague Terry, i provided him detailed information about the system and also how you can rebuild it.

Thanks,
Carsten

[Akuvox_Dora]

Hi Carsten,

I sent you an emial about the Onvif compatibility issue feedback on March,7, 2018.
Did you receive it ?
I setup the Xpenology in virtualBox and installed the "surveillance staion" in it. In my environment it is works well.Here are some screenshots.

[Carsten]

That is curious!
I couldn't connect the the ONVIF Assistant integrated but with manual configuration...

So; for the Moment it is working for me, also as it was a bit reverse engineering to find the right configuration parameters.

Thank you anyway for your kind support! Appreciate that!

[der-wahre-olli]

Hi Carsten,

up to now all my tests are very dissatisfactory!

- Windows-programme ONVIF-Device Manager: It has functioned exactly once (!). Afterwards only error messages.
- Windows-progamm iSpy: Only error messages.
- Android-programm Onvifer11.7.: Only error messages

Everytime Errormessages like this(example from Onvifer11.7...):

Screenshot_20180405-171545.png

I'm using ROM 26.0.3.20
Any helpful idea? What configuration parameters do you use now?

Greetings Olli

[Carsten]

Hi Olli!

I made the configuration manually, beside Onvif in my Synology Surveillance Station.
Therefore i used the following parameters:

Port 554 (RTSP)
Source parth (Quellpfad) /live/ch00_0

For the moment and my solution its working to satisfy my needs.

But i think, ONVIF Implementation is not final, yet.

[connectel]

Hi
It work with Synology only if we dont set password !

[Akuvox_Jon]

Hi
It work with Synology only if we dont set password !

Hi Sir,

May I know your current firmware version please?

We have tested with 26.0.3.31 before, and it works well.

Maybe you can have a try to upgrade it firstly?

You can download the latest firmware on our forum.

Best Regards