Hi,

is StartTLS on port 587 or SSL on port 465 to send the action emails from R26 supported?
I use the firmware: 26.0.3.40 and it doesn't seem so.

Thanks in advance,
Andreas.

Hi Sir,

Do you test it with gmail?

Maybe you can refer to the configurations as below:
For the default port 465:


For the port 587:


Thanks

Thanks a lot, I will try this out.

Hi, since the update to firmware version 26.0.3.102, the secure sending failed with the message:

Result:SSL connect error

on port 587. But the SSL certificate is valid till Dec. 5, 2018.

Any ideas?

Thanks in advance, Andreas

AMCS wrote:Hi, since the update to firmware version 26.0.3.102, the secure sending failed with the message:

Result:SSL connect error

on port 587. But the SSL certificate is valid till Dec. 5, 2018.

Any ideas?

Thanks in advance, Andreas

Hi Andreas,

The version 26.0.3.43 is newest firmware in this forum, maybe you should use this firmware to have a try.

By the way, for TLS to work, the email delivery services of both the sender and the receiver always have to use TLS. Maybe you need to check it first.

Thanks

This is not working for me also.
My mailprovider definitely supports TLS.
Strange is that FW 26.0.3.43 is still the latest Standalone one here, but i got my R26c delivered with 26.1.3.11.
This can be found nowhere but should be newer and emailencryption is not working.

BastelWastel wrote:This is not working for me also.
My mailprovider definitely supports TLS.
Strange is that FW 26.0.3.43 is still the latest Standalone one here, but i got my R26c delivered with 26.1.3.11.
This can be found nowhere but should be newer and emailencryption is not working.

Hi Sir,

Maybe you can use the firmware 26.31.3.238 for testing - viewtopic.php?f=31&t=207

Thanks

Thanks!
Using firmware 26.31.3.238 encrypted mails are working.