action on card

[anvial]

hello, is it possible to perform an http action when I insert a card?
would it also be possible to transmit the variable card?

Thanks in advance

[Akuvox_Jon]

Hi, sir. It is possible to trigger a http command when someone swipe a valid card after development.
If you need it indeed, please contact with our technical support team.
As for the second question, I cannot understand the Variable Card clearly enought.
Could you please explain it for me ?

[anvial]

Each card has a number I would like to transmit this number via GET

[Akuvox_Jon]

Get it, I think you meant that when someone insert a card, R26 will send a http command with card number.
It is doable.

If you need it, you can contact with our technical support for a further discussion with email.
The email address is [email protected]

[bytesitter]

Hi, any success on this feature ? Tried to write to techsupport@ , but mail got back with <[email protected]>: host mxbiz1.qq.com[184.105.206.59] said: 550 Mail content denied. This feature would be really nice.

[Akuvox_Neil]

Hi,

For this feature, you can try the action Url feature.

You can configure it in the path: Phone-Action URL. First enable it, fill in the http command in the corresponding part, like open relay success(when open the door successfully via enrolled cards). The URL format is http://server IP address/help.xml?cardnumber=$card_sn.

Then use the card to open the door, it will send out card number.

Note: When you testing, your PC should open the HTTP server. Your PC and device should connect to a hub for capturing packets to checking whether you receive the needed massage or not.

Best regards

[bytesitter]

thank's a lot this is working. For all others searching for this:
FW Version: 26.0.3.31
Go to Phone -> Action URL and set Active to Enabled
I used the "Card" Action with following url:
http://$IPADDRESS$/input.php?cardnumber=$card_sn

just for testing my input.php:

Code: Select all

<?php
$fp = fopen('/tmp/data.txt', 'w');
foreach($_GET as $key => $value){
          fwrite($fp, $key . " : " . $value . "\r\n");
}
fclose($fp);
?>


last thing to change would be the sound when putting the card in front.

[mtksrl]

Good Morning, I've an issue: with FW 26.31.4.110 (latest firmware) Card actionurl does not send card number? Have you any hints? Thanks

[Akuvox_Evelyn]

Good Morning, I've an issue: with FW 26.31.4.110 (latest firmware) Card actionurl does not send card number? Have you any hints? Thanks

Hi sir,
May I know what version was it before the upgrade? Please clear the web cache to check again. In the version of 26.31.4.110, it does not support the Action URL function.

Thanks.

[mtksrl]

Hi, the working version was 26.0.3.31. In the version of 26.31.4.110 action url for door open works but sends only mac or ip not card number. Have you abondoned support for newer versions? This is a feature that we need a lot. Thanks.