Page 1 of 1
R26C Intercom Motion
Posted: Wed Apr 04, 2018 10:56 pm
by connermacleod69
Hi,
I tested all options but I have no positiv result on close Relay A or Relay B. This should close one of the both relays on the unit. I do not hear a click neither testing with a multimeter (BIP) gives a result.
Regards,
Serge
Unbenannt.PNG
Re: R26C Intercom Motion
Posted: Mon Apr 09, 2018 11:22 am
by Akuvox_Neil
Hi,
For the Close Relay(A or B) feature, it can not be used in this AK firmware version(It is for a special version).
I will ask our R&Ds to make it been screened in new AK firmware version.
Thanks for your understanding.
Best regards
Re: R26C Intercom Motion
Posted: Fri Sep 07, 2018 3:22 pm
by reisner
Hi,
I have a R26C with FW: 26.0.2.57 in operation but I have no entry for motion detection in the settings menue. Can someone tell me what is wrong?
regards
Ralph
Re: R26C Intercom Motion
Posted: Fri Sep 07, 2018 6:38 pm
by Akuvox_Shirley
reisner wrote:Hi,
I have a R26C with FW: 26.0.2.57 in operation but I have no entry for motion detection in the settings menue. Can someone tell me what is wrong?
regards
Ralph
Hi sir,
Do you mean that you cannot see the live view in this path:
Intercom - Live stream?
There are two basic ways for you to check this problem:
1. Clear browser cache.
2. Go to
intercom - relay - relay basic to enable the RTSP server and try it again.
And also, you can download the latest firmware version for R26C and try it again:
http://forum.akuvox.com/viewtopic.php?f=34&t=12Best regards.
Re: R26C Intercom Motion
Posted: Tue Sep 11, 2018 1:44 pm
by reisner
Hi,
No, the Intercom->Motion menue entry is missing in the setting page. The Admin Guide for the R26 series and the subject of this post suggest this should be available.
Thnaks
Ralph
Re: R26C Intercom Motion
Posted: Tue Sep 11, 2018 2:25 pm
by Akuvox_Shirley
Hi sir,
Can you find the motion menu on the other browser? If so, could you clear browser cache and try it again, please?
You can press "ctrl+F5" to refresh the web or clear the cache on the browser manually. For google chrome, the path is setting - advanced - Privacy and security - Clear browsing data.
Best regards.
Re: R26C Intercom Motion
Posted: Tue Sep 11, 2018 6:27 pm
by reisner
Hi,
I tried it also with different browser (Mozilla, Safari..), the Motion entry isn't visible:-)
regards
Ralph
Re: R26C Intercom Motion
Posted: Tue Sep 11, 2018 6:58 pm
by reisner
Hi,
sorry I think I got it now, the FW 26.0.2.57 is not the latest one. I will update with the 26.0.3.40 and see what happen.
regards
Ralph
Re: R26C Intercom Motion
Posted: Wed Sep 12, 2018 9:02 pm
by reisner
Hi,
Yes i withdraw my post, with the latest FW on the doorstation everything is OK!
Thanks
Ralph