3.2.1 From the admin manual:

"Number of Show Contacts: User can setup 0 to 8 top contacts under
Only -Contact mode. The top contacts are some important or commonly
used numbers."

This works just fine and the selected number of top contacts is shown in the display.
However these are empty and I can't seem to find where I can assign anything to these contacts.

As only Contact mode disables the on screen configuration I assume this has to be done in the webinterface somewhere.
I've also looked at the exported .conf file and phonebook to look for clues how to get this to work.

Is it even possible to assign something manually or are the Top Contacts automatically generated?
Any ideas what I am missing here?


Best regards,
Max

Hi,

Glad to receive your message!

For the top contacts under Only-Contact mode feature, you can do as followed:
1. In the Dial interface, press 9999 + Dial key, then input 3888 to enter the system setting interface, add the contacts in R29F/S. Or add contacts in its website from this path: Phonebook-Local Book;
2. After adding the contacts in R29F/S, long press a contact to select it to be the top contact;
3. Configure the Display Type to be Only-Contact mode, and Number of Show Contacts not to be 0 in its website;
4. Check it.

Note: After yo uconfiguring the Only-Contact mode, you can click Search, press 9999 + # key, then input 3888 to enter the system setting interface.

Thanks