Coupling R26p with the FRITZ!Box of AVM

[der-wahre-olli]

Hi

I expect my new door station R26p in the next few days.

I would like to connect this door station with my FRITZ!Box of AVM.
Is there a user who has already done this and can give me some information on the necessary configuration of the door station and the Fritz!Box?
Nice would be a few screenshots of the settings.

Thank you in advance for your help.

Olli from Germany

[Akuvox_Terry]

hello

FRITZ!Box of AVM is a router, right?
so do you mean that you don't know how to configure R26p under a router?
here is a user manual for you to login the webpage of R26p and then do the configuration.
http://www.akuvox.com/supportDownloadSh ... 5&n_pid=46


Thanks

[Carsten]

Hi Olli!

I did this, what are your questions?

Grüße aus Deutschland,
Carsten

[Akuvox_Terry]

Hi Olli!

I did this, what are your questions?

Grüße aus Deutschland,
Carsten

you're so kind, appreciated!

[der-wahre-olli]

Hello Carsten,

nice to hear, that you have already coupled a R26 door station with a Fritz!Box.

I operate a Fritz!Box 6490 Cable together with some Dect-telephones Fritz!Fon C4.

I would like to integrate the door station in the system and see in addition to the voice communication also a live image on the Fritz!Fon.

So far I have no experience in the coupling of such systems, so that I can certainly use help well.

The door station will be delivered later this week, then I'll start setting up.

It would be nice if you have some screen shots of the R26p and the FritzBox. That would certainly make my job easier.

If not, then you can maybe help me if problems occur.

Thank you in advance.

Greetings from Bremen
Olli

[Carsten]

Hi Olli!

I have the same FritzBox in use. It is very simple and way forward:

1. Configure Device in FritzBox "Telefonie -> Hinzufügen -> Türsprechstelle -> LAN/WLAN"
This will lead in SIP Credentials you can use to configure the Account in the R26P

2. Configure the R26P so, that it is calling the "Rufnummer der Klingeltaste" which you configured (or suggested by the box) inside the FB.
Inside FB you can also build a call group "Rufgruppe" which means that FB will ring this internal phones simultanously.

3. To get the picture shown on you FritzFon you have to configure the chapter "Live Bild" in FB under "Türsprechstelles" configuration to
type http (Dropdown field) and than use the url "deviceip-of-r26p:8080/picture.jpg" (Thanks to the Akuvox-Guy who provided the information in this forum)

Than, normally it should work

[der-wahre-olli]

Hi,
it is really very easy, if you consider the following special feature:
When setting up the Account/Basic on the R26P, the following must be entered!

SIP account:
Register Name ==> The Fritz! Box assigned "Benutzername".
User Name ==> Also the Fritz! Box assigned "Benutzername".
Password ==> According to the input at the Fritz! Box.

SIP Server 1:
Server IP ==> The Fritz! Box awarded "Registrar"

See also the two screenshots below.

Greetings Olli

20180203_133409.jpg

20180204_114837.jpg

[Wache2604]

I have a problem with the registration. I have the data like the example of the true olli.
I always get the message: Registration Failed

What can I do.

if I enter in the field server ip: "http://192.168.82.1" but he looks longer but then says Registration Failed.

What can I do ?

Structure: R26C and Fritzbox 6490. Password must also have signs in the Fritzbox 8.
Example: == "WAKE123"
  Firmware Fritzbox 6.87

[der-wahre-olli]

Hi Wache 2604

in my case the user name (620) was suggested by the Fritz!box (6490). I have also not changed him.
Therefore i have identical Information at the Statuswindow Account1 (see picture1)

InkedScreenshot_20180405-140808_LI.jpg

and the register and user names at the account-window (see picture2)

InkedScreenshot_20180405-141059_LI.jpg

Maybe this information helps you.
Greetings Olli

[Wache2604]

Hallo Olli,

the problem is the registername. The registername and the username is equl. this is not right. The name from the sip is the registername and the user and pw ist the device. I make in the next time sreenshots.

Greetings Mike