Firmware

Doophone with Single Call Button
Post Reply
Pincho
Posts: 35
Joined: Sat Feb 10, 2018 8:51 pm

Firmware

Postby Pincho » Sat Jun 16, 2018 5:20 am

Hi,

could you add a little info to each new firmware, which has changed with the new firmware.

Or what problem was solved with it.

What is different at the 26.3.40 than at the 26.3.32
Top
AMCS
Posts: 4
Joined: Mon Apr 02, 2018 7:29 pm

Re: Firmware

Postby AMCS » Mon Jun 18, 2018 6:30 pm

Dear Pincho,

where do you find the new firmware for R26* ?

Thanks Andreas
Top
User avatar
Akuvox_Neil
Posts: 98
Joined: Tue Aug 08, 2017 9:45 am

Re: Firmware

Postby Akuvox_Neil » Wed Jun 20, 2018 11:16 am

AMCS wrote:Dear Pincho,

where do you find the new firmware for R26* ?

Thanks Andreas


Hi,

Please find the new firmware of R26 from this link viewtopic.php?f=34&t=12

Best regards
Top
User avatar
Akuvox_Neil
Posts: 98
Joined: Tue Aug 08, 2017 9:45 am

Re: Firmware

Postby Akuvox_Neil » Wed Jun 20, 2018 12:04 pm

Pincho wrote:Hi,

could you add a little info to each new firmware, which has changed with the new firmware.

Or what problem was solved with it.

What is different at the 26.3.40 than at the 26.3.32


Hi Pincho,

I help to add the change log. Please check it in the link viewtopic.php?f=34&t=12

Best regards
Top
crombeen
Posts: 20
Joined: Thu Apr 05, 2018 3:59 pm

Re: Firmware

Postby crombeen » Sat Oct 27, 2018 7:33 pm

For the newer release there is no Changelog published.
Please implement a release workflow that includes releasing Changelog information.

viewtopic.php?f=34&t=12&sid=c0bf2cd8cdaa9dcd7435cf54729c5180#p533

Thanks !
Top
Akuvox_Cathy
Posts: 21
Joined: Wed May 16, 2018 2:38 pm

Re: Firmware

Postby Akuvox_Cathy » Fri Nov 23, 2018 5:02 pm

Hi Sir,

Thank you so much for your advice. We have improved release workflow.

Please see the attached link:
viewtopic.php?f=31&t=207
Top
Pincho
Posts: 35
Joined: Sat Feb 10, 2018 8:51 pm

Re: Firmware

Postby Pincho » Mon Nov 26, 2018 2:01 am

The new software 26.31.3.255 you have specified under point 3 that now an external ringing bell is possible.
how is this connected?
Top
Pincho
Posts: 35
Joined: Sat Feb 10, 2018 8:51 pm

Re: Firmware

Postby Pincho » Mon Nov 26, 2018 6:13 pm

Can you please set us a connection diagram for the external chimebell.
Top
Akuvox_Evelyn
Posts: 36
Joined: Wed Aug 01, 2018 9:19 am

Re: Firmware

Postby Akuvox_Evelyn » Tue Dec 04, 2018 2:05 pm

Pincho wrote:Can you please set us a connection diagram for the external chimebell.


Hi,
For the chime bell connection diagram, you can refer to the picture below.
R26 chime bell.png


In addition, you need to go to the path Intercom->Basic->Chimebell setting on the web to configure. Which relay to configure depends on your connection.
1543903166(1).png


Thanks.
You do not have the required permissions to view the files attached to this post.
Top
Pincho
Posts: 35
Joined: Sat Feb 10, 2018 8:51 pm

Re: Firmware

Postby Pincho » Sat Dec 08, 2018 10:10 pm

Hi,

it worked. I connected it to the relay B. Here you can set the time how long it is active.

In my Chimebell would be another option gut.one can specify the number of pulses. Not only the duration of how long the relay should be active.

My chimebell needs a short impulse. So that the chimebell rings several times. Is that possible?
Top
Post Reply

Return to “R26,R23”

Who is online

Users browsing this forum: No registered users and 22 guests